How to Save Water at Home

How to Save Water at Home
Written by Irina Vasilescu

If you live in a city that’s highly urbanized, you may take for granted the fact that you have easy, instant access to clean water at all times of the day. But once you are in an environment where water is scarce, or clean water is virtually unavailable, that is when you will realize the importance of conserving every drop of the precious liquid. No matter what kind of water source you currently have at home, it is crucial to conserve as much water as you can.

Not only are you doing your share in helping save the environment, but you are also saving money in the process. Remember that the lower that your water consumption is, the lower your utility bills would be. Considering such benefits should motivate you enough to conserve water inside the home.

The Importance of Taking Measures to Conserve Water Inside the Home

If you’re not yet convinced about how necessary it is to conserve water inside the home, take a look at the following water-related statistics:

  • During the 1990s, 30 states in the US were found to have water stress-related conditions. This number increased to 40 states in the year 2000, and 45 states in 2009.
  • In all parts of the world, there is a worsening situation when it comes to the supply of clean, drinkable water.
  • By implementing a few simple changes in the home, you can save as much as 40% of your typical household water consumption for a month.
  • There are water-saving features that you can install that will cut back your in-home water use by as much as 35%.
  • Most of the solutions that can be implemented in a typical household do not even require the use of tools, drilling, etc. – so they require as little effort as possible.

If only every household will make the effort to conserve water, there will be enough of it to go around. Once the world’s water supply has been depleted, it might be too late to implement such water-saving measures, so it is best to start as early as now.

Top 10 Ways to Save Water at Home

When you look through the following list of the things that you can do to conserve water inside your home, you might be surprised at how easy some of them are.

By being a bit more conscientious with the way that you are consuming water, you will be saving a lot of water – and money for utility bills – in the process. Here is a list of the top ten ways that you can save water at home:

1. Make sure that your faucets and bathroom/kitchen pipes do not leak

If you live in an old apartment or house where the plumbing has not been updated yet, there could be hidden leaks which results to water wastage.

Did you know that a faucet which drips even one drop of water constantly can waste up to 30 gallons of water per day?

Just imagine how much water wastage there would be if the leak is bigger, or if the water is actually spurting from the pipes. As such, you should not wait for your water consumption to reach humongous levels. When you know that there’s a possibility that there is a water leak somewhere in your house, check it immediately or have a professional plumber do it for you.

2. Know how to save water while flushing the toilet

Another water-related trivia that you should be aware of is this: whenever you flush a cigarette butt, a tampon, toilet paper or small bits of trash in the bowl, you are actually wasting five to seven gallons of water.

The lesson of the story is that you should never turn your toilet into a waste basket. Only use it for its intended purpose, so that you would not have to spend any more than you have to on utility bills. Not only that, but you are also doing your share in helping save the environment by saving water in the process.

3. Replace your existing showerheads and faucets with water-saving fixtures

When you take shorter showers, you are saving a lot of water in the process. But if you would like to take things one step further, what you can do is replace your existing showerheads which ones with a low-flow feature. There are many inexpensive and easy-to-install fixtures that you can use. Check out your local hardware store for replacement units, or to find the right features for your showerheads and faucets.

As compared to traditional showers, a low-flow unit can actually save you 2.5 gallons of water per minute. While you are soaping up your body or shampooing your hair, it would not hurt either to turn off the shower. Another thing that you can do to conserve water at home is to fit all faucets with aerators. These devices are cheap, handy, water-saving and easy to install.

4. Use the age-old trick of putting a float booster in the toilet tank

You can use the age-old trick of putting a float booster in the tank of your toilet at home. This saves lots of water while you are flushing the toilet.

You can either finish a DIY toilet tank floater project or simply buy a float booster from your local hardware. Just make sure that you are leaving up to three gallons of water in the tank to keep the toilet clean and for its mechanism to flush properly. With this trick, you are saving ten or even more gallons of water on a daily basis.

5. During winter, make sure that your water pipes are insulated

Your local hardware store is a virtual goldmine of water and energy-saving mechanisms. When you buy a pre-slit foam pipe insulation product, you can heat the water for your shower a lot more quickly. Not only that, but you can also conserve water while you are waiting for it to heat up.

6. Know how to conserve water while showering or brushing your teeth

This method of saving water does not require you to buy anything. When taking a shower, simply sing a shorter song or use a timer to know when your time using water is up. You will save gallons and gallons of water in the process simply by taking shorter showers. Stop the flow of water while you are soaping up your body or shampooing your hair. When it’s time to rinse, that is the time that you can turn on the water supply again.

The same thing holds true when you are brushing your teeth. Simply turn off the water supply while you are in the process of brushing and only turn on the faucet when you need to rinse. Better yet, use a glass of water so you will not waste any water while doing your daily grooming ritual.

7. Only run the dishwasher and washing machine for full loads

Pre-rinsing dishes or dirty clothes is a process that actually wastes water. When you skip this step, you are saving a lot of water in the process. If you do have an older model of a washing machine or dishwasher, replace it with ones that let you not just conserve energy, but water as well. Check on the Energy Star rating of the appliance – the higher the rating is, the better. Only run them for full loads so that you can save on electricity and water consumption.

8. Water your lawn only when needed

Everyone wants to have green front lawns or backyards. But during the summertime when people need to conserve water, it does not make sense to maintain a green lawn. Only water the grass in front or the back of your house as needed, so that you can save on your household’s water consumption.

9. Use water conservatively when washing your car

No matter how much you love your car, washing it with a pressurized hose is never a good idea. This will waste lots of water in the process. When washing your car or any kind of vehicle, it makes sense to use water conservatively.

Fill a bucket with sudsy water and pour it over your dirty vehicle. If you must use a hose while washing the car, only turn it on when rinsing. The soaping process can be done without wasting gallons of water for just one car wash session.

10. When replacing major household appliances or fixtures around the house, make sure that they have water and energy-saving features

Finally, if you need to replace a major appliance or any fixture around the house, make sure that it will allow you to conserve water and electrical consumption. With the sad state of the environment today, there is no question that conserving water should be of utmost priority.

Sadly, not all households take measures to cut back their water consumption. By following the aforementioned tips, you can save gallons and gallons of water on a monthly basis. Not only will you get to help save the environment by conserving water, but you are also doing yourself a favor by reducing the utility bills that you have to pay.

Last Updated on

About the author

Irina Vasilescu

Irina Vasilescu is our money-saving and DIY expert and also the editor-in-chief as she's always on the lookout for the latest online deals.


  • Don’t forget grey water can water your plants for you! You can hook up the washing machine hose to a hose that goes outside, either to a tank or just into a hose that has holes all through it and goes around the yard. Many people have those sort of hoses hooked up to taps anyway, but this way you aren’t using twice the water, and as a bonus you don’t have to pay because it’s been paid for when you did the washing! 😉

    It also helps to check the weather because if it’s going to rain there’s no point watering the garden :).

    • Yes! We have that kind of setup back home. We would connect all sorts of pipes in our drains and have it diverted to our gardens. It really helps a lot when it comes to saving, just be sure that the water isn’t full of strong bleach and stuff otherwise it might kill your garden off.

  • Also one tip from my parents, if you’re living in place where it rains a lot, catching the rain water using some spare water tank of some sort and you can connect it to your bathroom toilet as to save some water when flushing. But this requires some work though.

  • Water is life. It is more difficult to have no water at home than electricity. We sometimes experiences this scarcity of both electricity and water specially during summer. We can all live a day without electricity (though it is difficult to sleep at night), but boy, if water is gone out of our faucet then we all have serious problem.

  • Sensors have come at wash basins and showers. They may be fitted to save a lot of water. These sensors work only when you place your hand under a tap. Some people simply run the taps constantly as long as they brush. This practice can be stopped by fitting sensors to save good amounts of water.

Leave a Comment